Hisense has a presence in over 54 countries, and Hisense TVs are sold in over 160 countries. The company is highly innovative and their TVs are one of the top-rated budget-friendly TVs out there.
However, Hisense TVs aren’t immune to damage. Not electrical device is. You may notice some unpleasant things about your TV if you don’t use it appropriately. So, the fault from your TV could sometimes be yours or the manufacturers.
You may have noticed your Hisense TV red light blinks 2 times but can’t understand why this is happening. We understand why your TV is acting this way and how you can fix it. That’s why we drafted this post in the first place. So, if you want to know more, keep reading!
Hisense TV Red Light Blinks 2 Times: Reason?
Table of Contents
The reasons your Hisense TV red light blinks 2 times differs. It could be due to faulty power, LED back array issue, or your tv stuck on standby. And knowing these possible reasons is important. This way, you can address the problem once and for all.
Below are the reasons your Hisense television red light blinks twice.
1. Faulty power
Power failure could be one of the reasons your Hisense TV keeps blinking twice whenever you turn it on. It signifies there is an internal fault with the power board.
The components that can cause your power board to become faulty are:
- Blown fuse
- Bad capacitor
- Blown out or faulty internal components
Besides these, other factors can cause power board failure. But the most prevalent ones are blown fuses or capacitors. However, every component of Hisense TV is important. Thus, your TV may not function as expected if any of the components become faulty.
A Handy Tip: Allow an expert technician to fix power board failure or replace the component causing your Hisense TV to blink twice. This isn’t a DIY repair project for someone that lacks sufficient technical knowhow, unless you don’t mind losing your TV along the line when a mistake occurs.
2. LED back array issue
This problem doesn’t often occur in Hisense TVs, though it is worth discussing. Another thing you need to know is that the LED back array issue won’t affect your TV’s normal operation.
Your TV will still be showing media content as usual, but the red light will continue blinking twice on the power button. When this happens, understand that something might be wrong with your LED panel.
Contact an expert to fix this problem, if you lack technical knowledge. Don’t try to fix it yourself.
3. Stuck on standby
Have you noticed that your Hisense TV is “stuck on Standby” most of the time? This happens when the TV has been in use for some time. It would get stuck with the power button red light blinking continuously. When this happens, even the TV remote or other operation buttons on the TV won’t work.
Note that these issues do not make Hisense TV subpar among the range of budget-friendly TVs on the market. On the contrary, Hisense TVs are among the solid budget TVs on the market.
However, like every other device, Hisense TVs could fail. It is also important to note that most persons have used their Hisense TVs for years without experiencing any fault.
How To Fix Hisense TV Red Light Blinks 2 Times?
If you’re interested in knowing how to fix Hisense TV red light blinks 2 times, you should follow the steps below.
1. Reset your TV
Do you have Hisense TV that blinks 2 times and you feel disturbed by it? If yes, you can do the normal reset, and your TV may start working again.
Here’s how to do this.
- Remove the TV plug from the power supply.
- Wait for about 10 – 15 minutes.
- Press the TV’s power button (Note the power button on the remote control). Hold the button and plug your Hisense TV’s power plug into the electrical outlet.
- Please, keep the power button pressed for around 60 seconds even as you have plugged the TV back into the power supply. Now, turn on the TV.
This should fix the problem. But if it doesn’t, try the next method.
2. Power cycle the Hisense TV
The power cycle is the first technique most people deploy when they discover that their Hisense TVs are blinking twice. It is also a simple process.
Here’s how to power cycle your TV:
- Remove the power plug from the electrical outlet.
- Allow the TV to rest for about 5 minutes once you unplug it.
- Now, put the power cord back in and restart your TV.
3. Observe the power supply
Since your Hisense TV is blinking 2 times, it is obvious that the power supply could be the culprit. If you have left the TV plugged into an extension cord all this while, unplug it from the extension cord.
Now, plug the TV into the wall outlet and see if the problem persists. If it does, check the wall outlet’s output and input voltage. Do they match the TV requirement?
If the voltages don’t match, there could be a short circuit in the Hisense TV’s circuitry.
This may cause the TV to blink 2 times too.
4. Contact customer support
Have you tried all the troubleshooting techniques but your Hisense TV keeps blinking 2 times? If yes, you have to consider handing over that TV to an expert technician.
If you have a reliable technician you trust, you can contact them to fix your TV. Please do not to try to fix the TV if you lack sufficient technical knowledge. You may damage the TV beyond repair or incur more costs when you finally hand it over to an expert.
If you cannot find someone to fix the TV, contact Hisense customer support for help. They may recommend a trusted place you can fix the TV.
How Do I Reset My Hisense TV That Won’t Turn On?
You can reset Hisense TV that won’t turn on in several ways. Let’s discuss them in detail.
1. Consider checking your remote control
You can try turning on the TV using the remote control and see if it would respond. If it doesn’t come on, try changing the batteries on the remote control. There is a chance that the batteries could be down.
If the batteries are no longer working, your remote control won’t respond. However, if you have changed the batteries and the TV just won’t come on then try using the power button to turn it on.
If the TV turns on via the power button, the remote control has stopped working. Get a new remote control.
A Handy Tip: Once you’re able to power on the TV, you can reset it right away using a remote control that is working.
2. Power cycle the Hisense TV
You can use the power cycle technique to reset a TV that won’t turn on. Here are the steps below.
Here’s how to power cycle your TV:
- Remove the power plug from the electrical outlet if the Hisense TV has been on for a while.
- Allow the TV to rest for about 5 minutes once you unplug it.
- Now, put the power cord back in and restart your TV.
3. Hard reset your TV
If the attempt to reset your TV via the power cycle technique doesn’t yield a positive result, try to hard reset it.
Follow the steps below to hard reset your Hisense TV that has refused to come on.
- Locate the “Reset” button on your TV. It is a small hole at the back of the TV.
- Get a sharp object, such as a pin, that can reach the TV’s reset button. You can use a paper clip for this. Straighten the clip so it can enter the hole and reach the button.
- Press and hold the clip inside the hole for 15 seconds.
- Don’t take off the clip until the TV powers on.
Does a Hisense TV Have a Reset Button?
Yes, the Hisense TV has a reset button. Or let’s say most of them do. You can locate the reset button at the back of the TV. You’ll find the word, “Reset” written where the button is.
You can reset the TV to its default settings when you press this button using a paper clip. Resetting the TV can help to fix a range of issues that may be hampering its operation.
A Handy Tip: Hisense may decide to place the reset hole wherever it wants. So, don’t go about poking any hole you see on the TV, thinking it’s the manual reset button. If you’re unsure where the reset button is, consult the manufacturer’s manual.
What is the Lifespan of a Hisense TV?
The average lifespan of a Hisense TV is around 4 to 10 years. In other words, you can enjoy 40,000 to 10,000 hours of viewing time on Hisense TV.
The fact that Hisense is a budget-friendly TV doesn’t mean it would have a shorter lifespan. On the contrary, how you maintain and use the TV would have more impact on its lifespan than its price point.
Do not leave your TV on throughout the day. When not in use, endeavor to turn off the TV. This way, your Hisense TV will last longer.
Conclusion: Hisense TV Red Light Blinks 2 Times
Several things could be responsible for this. The TV may have a faulty power, LED back array issue, or stuck on standby mode.
You can fix these problems and restore your TV to normal operation by yourself. But remember that certain internal issues may require the expertise of a technician.
So, if you don’t have sound technical knowledge, let a professional fix your TV. You can also contact Hisense customer support for recommendations on where to fix your TV.
